File://o:\program%20files\productvision%204.0\reports\~pv85390.

Material Safety Data 24 Hour Assistance:
1-847-367-7700
Rust-Oleum Corp.
www.rustoleum.com

Section 1 - Chemical Product / Company Information
Section 2 - Composition / Information On Ingredients
Chemical Name
CAS Number
Weight % Less Than ACGIH TLV-TWA
ACGIH TLV-STEL OSHA PEL-TWA
OSHA PEL -CEILING
Section 3 - Hazards Identification
*** Emergency Overview ***: Contents Under Pressure. Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache or nausea. Vapors may cause flash fire or explosion. Extremely flammable liquid and vapor. Harmful if swallowed. Effects Of Overexposure - Eye Contact: Causes eye irritation. Effects Of Overexposure - Skin Contact: Prolonged or repeated contact may cause skin irritation. Substance may cause slight skin irritation. Effects Of Overexposure - Inhalation: High vapor concentrations are irritating to the eyes, nose, throat and lungs. Avoid breathing vapors or mists. High gas, vapor, mist or dust concentrations may be harmful if inhaled. Harmful if inhaled. Effects Of Overexposure - Ingestion: Aspiration hazard if swallowed; can enter lungs and cause damage. Substance may be harmful if swallowed. Effects Of Overexposure - Chronic Hazards: IARC lists Ethylbenzene as a possible human carcinogen (group 2B). May cause central nervous system disorder (e,g.,narcosis involving a loss of coordination, weakness, fatigue, mental confusion, and blurred vision) and/or damage. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Overexposure to xylene in laboratory animals has been associated with liver abnormalities, kidney, lung, spleen, eye and blood damage as well as reproductive disorders. Effects in humans, due to chronic overexposure, have included liver, cardiac abnormalities and nervous system damage. Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Eye Contact Section 4 - First Aid Measures
First Aid - Eye Contact: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Get medical attention. First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists. First Aid - Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material can enter the lungs and cause severe lung damage. Get immediate medical attention. Section 5 - Fire Fighting Measures
Extinguishing Media: Dry Chemical, Foam, Water Fog Unusual Fire And Explosion Hazards: Perforation of the pressurized container may cause bursting of the can. Water spray may be ineffective. Closed containers may explode when exposed to extreme heat. FLASH POINT IS LESS THAN 20 °. F. - EXTREMELY FLAMMABLE LIQUID AND VAPOR! Vapors may form explosive mixtures with air. Vapors can travel to a source of ignition and flash back. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Special Firefighting Procedures: Evacuate area and fight fire from a safe distance. Section 6 - Accidental Release Measures
Steps To Be Taken If Material Is Released Or Spilled: Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools. Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust. Dispose of according to local, state (provincial) and federal regulations. Do not incinerate closed containers. Section 7 - Handling And Storage
Handling: Wash hands before eating. Use only in a well -ventilated area. Wash thoroughly after handling. Avoid breathing vapor or mist. Follow all MSDS/label precautions even after container is emptied because it may retain product residues. Storage: Do not store above 120 ° F. Store large quantities in buildings designed and protected for storage of NFPA Class I flammable liquids. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Contents under pressure. Do not expose to heat or store above 120 ° F. Section 8 - Exposure Controls / Personal Protection
Engineering Controls: Prevent build-up of vapors by opening all doors and windows to achieve cross -ventilation. Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Use explosion-proof ventilation equipment. Respiratory Protection: A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection. A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. Skin Protection: Nitrile or Neoprene gloves may afford adequate skin protection. Use impervious gloves to prevent skin contact and absorption of this material through the skin. Eye Protection: Use safety eyewear designed to protect against splash of liquids. Other protective equipment: Refer to safety supervisor or industrial hygienist for further information regarding personal protective equipment and its application. Hygienic Practices: Wash thoroughly with soap and water before eating, drinking or smoking. Section 9 - Physical And Chemical Properties
(See section 16 for abbreviation legend) Section 10 - Stability And Reactivity
Conditions To Avoid: Avoid temperatures above 120 ° F. Avoid all possible sources of ignition. Incompatibility: Incompatible with strong oxidizing agents, strong acids and strong alkalies. Hazardous Decomposition: When heated to decomposition, it emits acrid smoke and irritating fumes. By open flame, carbon monoxide and carbon dioxide. Hazardous Polymerization: Will not occur under normal conditions. Stability: This product is stable under normal storage conditions. Section 11 - Toxicological Information
Chemical Name
Section 12 - Ecological Information
Ecological Information: Product is a mixture of listed components. Section 13 - Disposal Information
Disposal Information: Dispose of material in accordance to local, state and federal regulations and ordinances. Do not allow to enter storm drains or sewer systems. Section 14 - Transportation Information
Section 15 - Regulatory Information
CERCLA - SARA Hazard Category
This product has been reviewed according to the EPA "Hazard Categories" promulgated under Sections 311and 312 of the Superfund Amendment and Reauthorization Act of 1986 (SARA Title III) and is considered, under applicable definitions, to meet the following categories: IMMEDIATE HEALTH HAZARD, CHRONIC HEALTH HAZARD, FIRE HAZARD SARA Section 313:
Listed below are the substances (if any) contained in this product that are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372: Chemical Name
CAS Number
Toxic Substances Control Act:
Listed below are the substances (if any) contained in this product that are subject to the reporting requirements of TSCA 12(B) if exported from the United States: U.S. State Regulations: As follows -
New Jersey Right-to-Know:
The following materials are non-hazardous, but are among the top five components in this product. Chemical Name
CAS Number
Pennsylvania Right-to-Know:
The following non-hazardous ingredients are present in the product at greater than 3%. Chemical Name
CAS Number
California Proposition 65:
WARNING! This product contains a chemical(s) known by the State of California to cause cancer. These products contain no known chemicals known by the State of California to cause birth defects or other reproductive harm. International Regulations: As follows -
CANADIAN WHMIS:
This MSDS has been prepared in compliance with Controlled Product Regulations except for the use of the 16 headings. CANADIAN WHMIS CLASS: AB5, D2A, D2B
Section 16 - Other Information
HMIS Ratings:
VOLATILE ORGANIC COMPOUNDS, g/l: N.A.
REASON FOR REVISION:
Legend: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined
The information contained on this MSDS has been checked and should be accurate. However, it is the responsibility of the user to comply with all Federal, State, and Local laws and regulations.

Source: http://www.jjsm.biz/msds/PAINT-PRODUCTS/RustoleumGrayPrimer7582.pdf

richesassociates.ca

STOKO® TECH-ALERT No. 0108 Understanding and Dealing With MRSA The Basics — What Is It And Where It Is Found? Transmission and Vulnerability Disturbing, frightening and seemingly relentless, MRSA is transmitted primarily from the colonized MRSA (Methicillin-resistant Staphylococcus aureus) hand of a patient or healthcare worker who did has haunted the consciousness of th

Microsoft word - cidadao.rtf

O NASCIMENTO DO CIDADÃO DIFERENTE: PROGNÓSTICO OU JULGAMENTO Universidade de Santo Amaro - INTRODUÇÃO E OBJETIVOS O nascimento de bebês em condições que exigem a intervenção de profissionais da saúde são bastante comuns. No entanto, quando a condição, como no caso das anomalias congênitas, indica o desenvolvimento de deficiência, impedimento ou desvantage

Copyright 2014 Pdf Medic Finder